  /**
  @addtogroup EEPROM_Sector_Operations_93 EEPROM_Sector_Operations for MDR1986VE93 evaluation board
  @latexonly
  @verbatim
  ******************** (C) COPYRIGHT 2024 Milandr ******************************
  * @file    readme.txt
  * @author  Milandr Application Team
  * @version V2.0.1
  * @date    22/06/2023
  * @brief   Description of the EEPROM_Sector_Operations Example.
  ******************************************************************************
  * THE PRESENT FIRMWARE IS FOR GUIDANCE ONLY. IT AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING MILANDR'S PRODUCTS IN ORDER TO FACILITATE
  * THE USE AND SAVE TIME. MILANDR SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR A USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN THEIR PRODUCTS.
  ******************************************************************************
  @endverbatim
  @endlatexonly

@par Example Description

This example shows how to use EEPROM.
    - Erase main memory page 5
    - Word program main memory page 5
    - Erase information memory page 0
    - Word program information memory page 0


@par Directory contains:

    - main.c      Main program


@par Hardware and Software environment:

    - This example is intended to run on MDR1986VE93 eval board with MDR1986VE93 microcontroller.
    - VD2 (LED0), VD3 (LED1) are connected to PF.0, PF.1 pins, respectively.

@par How to use.

To launch the example, you must do the following:
    - Create a project and setup all project configurations.
    - Add main.c file.
    - Add the required files from "Library" folder:
        MDR32F9Qx_config.h
        MDR32F9Qx_port.c
        MDR32F9Qx_rst_clk.c
        MDR32F9Qx_eeprom.c
        MDR32F9Qx_utils.c
    - Place EEPROM functions in RAM by defining section "EXECUTABLE_MEMORY_SECTION" as RAM section.
    - Edit the MDR32F9Qx_config.h to set appropriate run-time parameter checking level.
    - Compile and link together all .c files and load your image into the target board.
    - Run the example.

 * <h3><center>&copy; COPYRIGHT 2024 Milandr</center></h3>
 */

